DRY FLEX® SF - Repair Care International

DRY FLEX® SF

Durable fine surface filler for quick, durable spot repairs on timber (paintable after 30 minutes*)

The best of a fine surface filler and an epoxy in 1 product. No primer required. Cures fast, also under colder weather conditions. Easy and fast to apply.

Suitable for:

Fine surface filling and quick, durable spot repairs.
The filling of nail holes, screw holes & cracks.
For repairs of small defects in existing DRY FLEX® repairs.
External and internal applications.
*Typical curing time for a repair applied at 20ºC. Temperature and humidity may affect curing times.

SKU: 9291418 Category: Product-range

Product Description

Quick and easy to apply.
Short curing time, even in colder temperatures. Paintable after 1 hour at 5ºC and after 30 minutes at 20ºC*.
Can be used with a standard skeleton gun.
Permanent repairs.
Ideal for small repairs.

*This is an indication. Temperature and humidity may affect curing times.

Additional Information

APPLICATION TEMPERATURE	0 – 30ºC
REPAIR THICKNESS	0 – 6 mm
CURING TIME	After 0.5 hours
PRE-TREATMENT	Not necessary
SHELF LIFE	See label: storage and transportation temperature: 5 – 30ºC

Remove all paint & dirt.
Ensure timber is dry.
Dispense DRY FLEX® SF on to the mixing plate.
Mix both components with EASY•Q™ application knives until a homogenous colour is reached.
Spread the mixed DRY FLEX® SF in a thin layer over the mixing plate (to extend the application period).
Apply the DRY FLEX® SF and leave the surface smooth.
When cured, sand the surface lightly before applying a paint or stain.

DRY FLEX® SF Component A
DRY FLEX® SF Component B
DRY FLEX® SF Product Sheet